I stand corrected then.Maybe I should test my SWC cast bullets I use for my 38Spl in my 357 Mag and see if I still get decent accuracy.Using cast lead...

Yip, about 1800 ft/sec seems to be the upper velocity limit of lead / PC bullets.This is the velocity I get from my 357 Magnum rounds when firing out ...

Nice write-up. The couple of Russian AKMs that I have fondles over the years really impressed in terms of their fit and finish.

My "shake and bake" method did not go as planned.  I can coat them and load the bullets, fire them in my 9mmP and 762x39, but about 2/3...

These bullets are for a 357 revolver that I don't yet have in hand so I don't know how well they'll do but all the other stuff I make w...

Looking for a Lee .358 sizing die.As usual I'd like to try second hand first before going to the dark side.******************************If you c...

Thanks but on second sober thoughts I'll leave well enough alone. I don't get to hunt so have no real use for them and lots of other pressin...

I'd be interested in taking a few of those off your hands for gits and shiggles. Of the three cast and powdercoated bullet loads I developed for ...

Not very different to a couple of fat okes 'hunting' off the back of a bakkie.

Well, the British hunted all kinds of dangerous game with the Bess.  Lions included.It was one of the longest military service guns in history.I ...

BTW a  load of 80 grains WANO FFG behind a 550grain .715" round ball travels at about 1000 ft/sec from the Bess.That's like a smokier a...

Might be worth checking with Craig at Blunderbuss in Alberton.