you can honestly get a B/Browning - dies and some ammo for 2 K on a regular basis.

I'd check with Blunderbuss. They keep a lot of old molds in stock.********************************************Thank you very much, that would be ...

I am shooting 1.4 gr MP 200. 90 gr bullet The 25ACP or 6.35 is a tiny little thing to load.

I'd check with Blunderbuss. They keep a lot of old molds in stock.********************************************Thank you very much, that would be ...

1992, gees, I had a .22 and a 45 ACP back then, also had hair. Used a Lee single stage press mounted to my kitchen table to reload. The Load Master wa...

Gees that is neat and tidy, my desk has things of interest and unusual finds cluttered everywhere.

I am not much off a shotgun person, but I have a few. I brush the barrel out and do a pull through with a oiled cloth.Any clearer ?

Do what you doing, think those thoughts only, reloading is not the time to ponder the meaning of life.

I used Iosso paste on a tight fitting bore mop. Put the case in the lathe and polish the inside for as long as you can without falling asleep from bor...

Hi. Also here from the "other site". Hopefully this one can stay on gunstuff.Although, this verification process; I hope it is not required ...

I like to use Mineral spirits or even lighter fluid - and Turpentine in the mix. It seems to be right when it has a certain feel when rubbed between f...

How long should a measuring slug be? I had 13mm of usable bearing surface. **************************Although I do not think there is a rule, I would ...

As the above shows, Interlocks may work just fine, I actually love them, they do a lot of damage internally if they get into the work area. Getting in...

To be honest, I don't really care for shotties - I have them, but they do not do much for me. A brush out and some oil on a cloth is where I am a...