https://systemz.online/reloading-methodology/powder-dispensers-automatic/ AllGunStuff Discussion Board en-US Fri, 08 May 2026 11:55:00 +0000 wpForo 60 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5138 Sun, 18 Aug 2024 12:41:26 +0000 We shall see.
Had a little mechanical mishap ;D , so not in good place at moment  ::)]]> Reloading Methodology Treeman https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5138 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5132 Sat, 17 Aug 2024 01:14:03 +0000
Electronic devices do have a large effect, but I regularly re-zero the scale. I have had good results on target and am happy to use my dispenser.]]> Reloading Methodology Tripodmvr https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5132 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5130 Fri, 16 Aug 2024 13:03:06 +0000
I use a powered powder trickler that is attached to my beam scale.  It does give me 0.1gn variations if I load a lot of ammo in a hurry, but that's within spec for most hunting and target applications.

With the combination of rotary drum powder measure and auto trickler, I can load significantly faster than all the expensive powder dispensers I have seen so far.

Have you noticed the number of used powder dispensers being advertised on the watsaap and telegram gun groups?  That should tell you something...]]> Reloading Methodology 223 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5130 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5102 Wed, 14 Aug 2024 02:21:53 +0000 Reloading Methodology Againstthegrains https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5102 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5078 Tue, 13 Aug 2024 01:14:07 +0000
I still use mine and 0,1gr is negligible on 40 to 50 grains of propellant.

**************************
.05 % of a 50 gr load I think.
.03 % of a 30 gr load]]> Reloading Methodology Treeman https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5078 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5074 Mon, 12 Aug 2024 23:57:15 +0000 Reloading Methodology Tripodmvr https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5074 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5072 Mon, 12 Aug 2024 22:35:12 +0000 Anita will eventually stop just smiling.]]> Reloading Methodology JamesNotBond https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5072 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5070 Mon, 12 Aug 2024 22:10:32 +0000
Do not wash the hopper and then wipe it down with a dry cloth. That causes static that is a nightmare to get off.

Switch it on at least an hour before your planned start.

Calibrate it at the start of every loading session.

More often than not, it would overthrow by 0.1gr. I used to program in whatever load I wanted -0.1gr. So if it threw what I set it, I just gently tapped on the little pipe to drop one or two more granules to make up the last 0.1gr.

When you finished draining the powder, close the little gate before closing the  drain flap. Check it again. Before pouring powder in the hopper, check that the drain is properly closed. Check it again. After you poured powder in the hopper and the level slowly is going down, check the drain!!!]]> Reloading Methodology janfred https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-5070 https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-662 Mon, 12 Aug 2024 12:32:01 +0000 I often see them for sale and wonder about buying one, but then always remember how slow it seemed and then the bad reviews that crop up with litany of wonder and praise for the thing. The older I get, the more tedious some parts of reloading have become, like measuring out propellent - wouldn't it be so nice if we could like u know, just buy loaded ammunition.
Who of ya all use these fancy thingee's?
How do you find their offerings?]]> Reloading Methodology Treeman https://systemz.online/reloading-methodology/powder-dispensers-automatic/#post-662