If you are desperate then that price might not feel that bad. Have you tried bolt and nut companies?YesUNOBTANIUM ...NO-one appears to bring in Imperi...

R 180.00 Incl. VATFor four = R45.00 EACH - IF my arithmetic is correct

There is also BA British Association Imperial small cap-screws with fine pitch designed for this type of application ( engineering )British Associatio...

Greetings ,My question .. seeing as we live in a metric WorldWhat say youNOT so easy4mm drill bit size is 3.3mm = special order3.3 does not remove ALL...

I've found that roll crimping has given me the most consistent accuracy and is the easiest way to set up absolute repeatability using a drill pre...

I once took the sear assembly out of my CZ75 pre-B. To do that, you have to remove the safety. That little safety detent tab is probably still in orbi...

Treeman? Since when do you advertise "EVE Online"?HHhmmmFits the Treeman .. PERFECTLY"EVE is what would happen if average humans were g...

There are two private companies who wanted to battle foot and mouth disease. The one is in Pretoria where some of the Onderstepoort personnel now work...

My QL figure = 1.62 g/ccGRT = 1.6 material densityGRT bulk density = 930 kg/cubic metreYES yesSo I was close on the bulk density - GRT is closer than ...

CIP certification requires a proof shot at something like 150,000 psi Proof shots are in the region of 70 to  80K psi. Primers sometimes pop at 8...

ThanksI just bought one ...  ;D An older model 4 - 16 x 50 for a good price .. now I need 30mm STEEL ringsOnce I have it set up I will let you kn...

Found the following post on the Long Range Forum in the US. A serious warnig to all reloadersThe reason I'm posting this is to maybe save someone...